Product Description:

Nano technology based paintwork coating for professional users. The paintwork is protected by a glass hard coating of fluoro carbon modified silicium dioxide particles. Intensively freshens up colours, and has outstanding dirt and water repellent properties. The product provides protection up to 12 months, depending on environmental conditions.

Directions for Use:

• Before treatment, polish to a hologram-free deep shine with SONAX Nano Polish, if necessary with SONAX Abrasive Polish in advance.
• Spray SONAX PaintPrepare onto the polished surface to control the result and to degrease prior to the sealant. Wipe off with a microfibre cloth.
• Spray SONAX Nano Paint protect into a tightly folded SONAX Polishing Cloth and working in a criss cross pattern, thinly cover the entire surface. Always work on smaller areas, maximum 1/2m² at a time.
• Leave to dry for max. 30sec, then wipe very sensitive with another microfibre cloth over the surface until there are no longer any smears visible.
• The treated surface should be allowed to harden for at least one hour, and it must not get wet during this time.

Please note:

• In order to achieve the optimum visual effect, it is imperative that the work is carried out in a well illuminated workshop (minimum 5300K daylight lamps, and a minimum of 700 Lux at the vehicle) After the coating has been applied, drive the vehicle into the daylight and in the shade make the final inspection. Polish out any irregularities with a microfibre cloth.
• Alternatively on black paints the use of an orbital polisher with a microfibre hood gives good results.

Safety data:

• Remove contaminated clothing.
• Ensure supply of fresh air.
• In case of contact with the skin, wash with soap and water and rinse thoroughly.
• In case of contact with eyes rinse thoroughly with water
• Do not induce vomiting. Refer for medical treatment.

Extremely flammable

Irritating to eyes

Vapours may cause drowsiness and dizziness

Do not breathe spray.

Avoid contact with skin

Pressurized container:

• protect from sunlight and do not expose to temperatures exceeding 50°C
• Do not pierce or burn, even after use
• Do not spray a naked flame or any incandescent material
• Keep away from sources of ignition-No smoking
• Keep out of the reach of children