Polish for specialist use in paint shops and for used car valeting. Use with a speed regulating polishing machine. Removes occluded dust, paint overspray, abrasion traces. Ideal for the restoration of weathered and scratched paintwork. High abrasion with simultaneous medium gloss effect.

Cut: 5
Gloss: 3

Directions for Use:

• Thoroughly wash the car and prepare the paintwork if necessary (remove tar, tree sap, surface rust etc.).
• Shake bottle well before use.
• Apply a small amount of polish onto the polishing pad yellow (493 100) and polish at the lowest rotational speed (ca. 800 rpm) exerting some pressure (ca. 10kg). Only work on partial sections (e.g. half bonnet) at a time. If necessary, spray on a little water with a pump sprayer.
• Remove polish residue with a microfibre cloth, or wash off with car shampoo.
• Afterwards, polish to a hologram free finish using SONAX NanoPolish (208 300) or NanoPolish&Wax (207 300)
• Do not work in direct sunlight or on warm paintwork.
• To conclude, seal the paintwork with car hard wax e.g. SONAX Hard Wax NanoPro (280 300).

Safety data:

• Change soaked clothing
• Ensure supply of fresh air.
• In case of contact with skin wash off with water.
• In case of contact with eyes rinse thoroughly with water
• Do not induce vomiting. Refer for medical treatment.